Minifig Case ready to ship

We can put another done stamp on another project. After making some minor change the final design for the Lego Minifig model case is now ready to ship. The primary change is in adding a face frame to help strengthen the top and bottom bands. This framework was kept as thin as possible to allow the maximum amount of light but still keep the framework sturdy. The piece shown is in wood but it is also available in an all acrylic design.

Full product shots and pricing details available on the Facebook page - https://www.facebook.com/BurnInDesigns

New Products - Skirmish / Model Transport Trays

The likelihood that you will be stationed on the same table for a full 3 or 4 game tournament is very small. Eventually you are going to have to move to another table. Now the problem, grab the models by the handfull and move them usually scratching the paint you spent hours painting, take 10 minutes to put you army back in the case and move it then scramble to get it all unpacked before the next round starts or uses a book or other make shift tray to move them. Well here is a new option, custom cut and engraved transport trays. The trays are available sized from 5x7" for low model count games through a maximum size of 9x13" for larger model counts. Design is fully customizable with you chosing the size and layout for all the models. We also offer a few standard layouts. All trays include carry handles and have a soft EVA foam backing  to help eliminate sliding. As always custom engraving is available for all designs. Prices start at $8 for the smallest tray and go through $20 for the largest tray with pre-cut magnet holes for safer storage.

Blank basic tray - 15 40mm / 4 60mm slots

Custom Robotech Tray Design

Custom Robotech Tray Design

Welcome and New Products

Hello and welcome to the Burn In Designs Blog / Product announcement page.

Burn In Designs is my new workshop and hobby outlet for laser cut table top gaming aids, terrain projects and general laser cut projects. The goal of this is to offer you new options that may not be available through other sources. Most products offered can be custom engraved or cut  to match your army. We also handle custom projects, built to order and to your specifications.

Here are some examples of our work and product offerings. If you see anything you like or have questions about custom projects, email us at BURNINDESIGNS @ GMAIL.COM.

50 pot paint rack

50 Pot Paint Rack

This is our 50 pot paint tray. It will hold 25 paints per tray. Each tray is cut to support both the old GW hex pots or the new GW round pots. The trays are also available for P3 and Reaper paints.

The overall size is for the unit is 11x10x6 inches. This way it gives a bunch of storage in the smallest possible space. The trays can be pivoted slightly to make getting to the ones at the back easier.

Custom engraving on the front of each tray is offered at no additional cost. We also offer it in several different acrylic colors in addition to the plywood seen here.

Collapsible Dice Roller 

Collapsible Dice Roller

Our Collapsible Dice Roller is a small 5x7" dice roller that will easily fit in you miniatures case. The unit is available in acrylic or wood and supports most standard die sizes. 

The unit is pre-drilled for magnets to make transport and use easier. This one is offered with custom engraving and just supply your own black and white line art or have us design a look for you. 

Again welcome to Burn In Designs and we hope you come back to see what we come up with next.