Sunday, August 11, 2013

New Products - Federation City

Federation City

Federation City is our newest terrain set for 6mm (1:285th) game systems like Robotech RPG Tactics or Battletech. The goal was to get away for the typical 2x2x2" cube buildings you normally see when building a 6mm city and inject a little more realism with buildings that can create a modern city skyline. So things like multi-block warehouses or hospitals are included in the system As well the buildings are tall because most cities grow up before they grow out. Even average sized buildings offer full cover for most models with the true sky scrapers putting things into perspective. That 4 to 8 story tall mech is no match for the typical 20 to 30 story building.

The buildings are hollow designs perfect for add-on lighting kits from PoweredPlay. Each kit will includes a mix of wood and acrylic parts that easily glue together with standard white glue in just a few minutes into ultra sturdy buildings that should last through years of game play.

Buildings are available in singles or table section sets to allow you to quickly build complete cities with varied skylines.

Empire Building (14x7x6" HWD) FC6-EB01 $30
Every city needs a focal point an in Federation City the Empire. At over 12" tall this skyscraper is the perfect centerpiece to any table skyline. The 7" square makes this a multi-block complex building, The kit is made up of multiple level sections that allow for easy transport or reconfiguration as 4 separate buildings making it a great value. As will all the kits in this set the building can easily be lighted for added detail.


15 Story Office Building (8x5x5" HWD) FC6-OB1501 $12
At 15 stories tall this building makes a great impression on the table top. To add additional interest to the building balconies have been added every 3 stories. The building is tall enough to create great flyby options for low level air combat or recreating your favorite battle in Macros City with Veritechs in fighter mode.

Shipping Warehouse (1.5x5x5" HWD) FC6-SW01 $8
Every city will have at least a few of these for moving goods into and out of the city. The warehouse is a nice change from the typical city skyscraper as well adding a bit of realism to the landscape.


Causeway Office Block (2x7x3" HWD) FC6-CB01 $8
This is one of the more unique and versatile designs. It is a causeway building designed to be used as a stand alone or as part of a large building complex. The building has a completely open lower level with openings that are designed to work with standard 6mm 2 and 4 lane roads.


4 Quarters Building (4x3x2.5" HWD) FC6-FQB01 $10
This 8 story building is designed to put a little twist on the normal square office block with the addition of corner blocks that create a set back for the main building.


Suspension Bridge (3x11x2" HHWD) FC6-SB01 $10
Adding a water feature to any table is a great way to add new challenges to your game.This bridge will make it a little easier. The bridge is wide enough form most standard sized models.


2-lane Stone Bridge 4-pack (1x6.5x1.5" HWD) FC6-SB02 $10
Not all bridges have to be grand ladies, some are just about moving people from point A to B. This is that sort of bridge. The simple design fits in well with any era and can be used over water features or roads.


Folkner Hotel (3x8x2" HWD) FC6-FH01 $9
This is another staple building that you see in allot of cities. It is the basic design that can be assembled with or without the car port to give a few more options in the build.



Administration Building (5.5x5x5" HWD) FC6-EB01 $9
The Administration building is a 2 level building with a twist. The large lower level has plenty of room for placing mechs on top of it while still granting cover. The upper section brings the total story count to 9 making it tall enough to block some flyers.


The Silo (7x5x5" HWD) FC6-SL01 (out for redesign)
The Silo is the first of our glass and steel skyscrapers. The building is a mix of wood and acrylic parts. The acrylic parts are available in bronze as shown or clear. The clear version allow you to tint/paint the acrylic to create interesting effects like the mirror finish most commonly seen on modern skyscrapers.

Hunter Hospital Complex (5x8x4" HWD) FC6-HH01 $15
Based in the hospital from Robotech, Hunter Hospital is an imposing structure. Though not the largest it is the most recognizable making it a great objective marker in any game.


3 Story Brownstone 3 pack (1.5x2x4" HWD) FC6-BS03 $8
6 Story Brownstone 3 pack (2.5x2x4" HWD) FC6-BS06 $8

These are staples for any city and as such are packaged 3 to a set. They are average sized but large enough to provide decent amounts of cover. They also can be combined together to create larger linked buildings as needed.


The Cloverleaf Casino (7x6x4" HWD) FC6-CC01 $23
The Cloverleaf is a unique standout building with its mix of acrylic and wood levels. The acrylic sections are precut for LED lighting to add an additional wow factor to the building. Even without the lighting the see through design looks great on the tabletop.


6 Story Twin Tower (3x6x2" HWD) FC6-TT01 $8
This is another common building design that you see on a city skyline. Be it an office block, apartment complex or administration building the basic twin design shows up everywhere.


3 Story Apartment Block 2 pack (2x3x4" HWD) FC6-AB03 $8
More common buildings with a little twist. It can be assembled as 2 3 story buildings or 1 6 story building just by stacking them together. Even better build higher just by adding additional sets to the mix.




The Horizon Building (6x7x7" HWD) FC6-HB01 $30
The Horizon Building is one massive structure. Based on 2 large building blocks with an elevated center section connecting them this will pose some interesting challenges. Being able to go through the building could be a great way to escape enemy fire or get the jump on a would be victim depending on what side you are on.

Additional Items not pictured -
Lighting Armature FC6-LIGHT $5
These add-ons are designed to make it easy to light your models with kits from PowerPlay. The armatures are designed to fit inside the buildings and hold the battery and necessary wiring. Each kit includes a single armature that can be modified to fit a variety of buildings. It is recommended you line the inside of the building you want to light with parchment paper to act as a defuser to spread light more evenly.

Table Sets
The Burbs FC6-BURBS $30

  • 3 - 3 Story Brownstone 3 pack (FC6-BS03)
  • 3 - 6 Story Brownstone 3 pack (FC6-BS06)


Shipping District FC6-SHIP $20

  • 3 - Shipping Warehouse (FC6-SW01)


City Center FC6-CENTER $95

  • 2 - 15 Story Office Building (FC6-OB1501)
  • 4 - 4 Quarters Building (FC6-FQB01)
  • 4 - 3 Story Apartment Block 2 pack (FC6-AB03)
  • 2 - 6 Story Twin Tower (FC6-TT01)


The Island FC6-ISLAND $350
 This set includes enough terrain for a densely packed 4x6' table. It is a complete table in box or really 2 tables. If you are ready for some epic games this is the set you really should be looking at getting.

  •  1 - Empire Building (FC6-EB01)
  • 4 - 15 Story Office Building (FC6-OB1501)
  • 2 - Shipping Warehouse (FC6-SW01)
  • 4 - Causeway Office Block (FC6-CB01)
  • 4 - 4 Quarters Building (FC6-FQB01)
  • 3 - Folkner Hotel (FC6-FH01)
  • 2 - Administration Building (FC6-EB01)
  • 1 - The Silo (FC6-SL01)
  • 1 - Hunter Hospital Complex (FC6-HH01)
  • 3 - 3 Story Brownstone 3 pack (FC6-BS03)
  • 3 - 6 Story Brownstone 3 pack (FC6-BS06)
  • 1 - The Cloverleaf Casino (FC6-CC01)
  • 3 - 6 Story Twin Tower (FC6-TT01)
  • 3 - 3 Story Apartment Block 2 pack (FC6-AB03)
  • 1  The Horizon Building (FC6-HB01)
  • 2 - Suspension Bridge (FC6-SB01)
  • 1 - 2-lane Stone Bridge 4-pack (FC6-SB02)



Each kit is shipped flat and can be assembled in minutes. As will all our kits custom engraving is available. To order a set email us at BURNINDESIGNS@GMAIL.COM or to find out more and stay on top of our new releases please  "like" us on Facebook at www.facebook.com/BurnInDesigns.

5 comments:

  1. how wide is the gap under the Horizon building's elevated bit?

    ReplyDelete
    Replies
    1. The space under the gap is about 3x3x3". The sizing on it was designed to make it easy to move and fit minis, even ones on standard flying stands under the building and still fit your hand in to move the models.

      Delete
  2. Why isn't the tall building with the angled roof in the top picture available?

    ReplyDelete
  3. That was a failed design. We have a new version of the building coming soon.

    ReplyDelete
  4. Hi are these available in 10mm scale at all?
    Our group is big into Dropzone and these would look really cool on the table. :-)

    ReplyDelete