Thursday, November 17, 2016

New Products - ISO Container Mover

New Products - ISO Container Mover

Shipping docks are one of the universal action scene settings. They offer everything from high sniper positions to deep canons and narrow passages. With so many possibilities and the simplicity they offer they work well in modern, post-apocalyptic and scifi settings. So what could make them even better adding the part to finish out the scene.

The ISO Container mover is the kit you have been waiting for . Designed to allow stacking containers 3 high, this kit is a great centerpiece for any table. It has a tall , over 12", and imposing 8x10" footprint. Moving on 6 large wheels that pivot 180 degrees to allow the piece to roll sideways and unload containers it adds that little extra detail we like to see on the table. The cabin is open allowing you to access the moving cable spools inside. The clamps are designed to work with all the current ISO containers we offer. 

ISO Container Mover


ISO Container Mover MCCS-ICM001 $70


Long wheelbase box truck 
If now that you have a crane you now need a truck to put the containers on and we have you covered on that. *container not included.
  
Long Wheelbase Box Truck,  MCT-STS32 $24 

ISO Shipping Containers

The standard ISO shipping container come in all different varieties but all have a few things in common, a standard size and shape, they look sturdy and can be stacked. These new containers fit that and will give you some nice, dynamic features you don't see in other offerings.

The containers are sold in singles or sets so you can quickly fill out your table. All the containers are based on a 3x3x6" box shape and have small, interlocking feet to tie them together. The design also sets a standard allowing us to expand on the set with more options and features as needed. For example we will be adding train cars, carriages and wheel sets to give the table a more realistic feel.

Sci-Fi ISO Container 

This is the basic shipping container with dual loading ramps and a set of platform feet.
Sci-Fi ISO Container 2 Pack,  ISO-SF02 $25
Sci-Fi ISO Container 5 Pack,  ISO-SF05 $55


Liquid Storage

Designed as 2 piece kit this one includes a removable cylinder "tank" section allowing the kit to be used as a open framed carrier box.
Liquid Storage ISO Container 2 pack, ISO-LS02 $25
Liquid Storage ISO Container 5 pack, ISO-LS05 $55


Modern End Door Container

Designed with a double swinging doors on 1 end. Set includes both full panel and just external support lattice to expand the assembly options.
Modern End Door Container 2 pack, ISO-MED02 $25
Modern End Door Container 5 pack, ISO-MED02 $55


Modern End Ramp Container

Designed with a single fold down ramp on one end. Set includes both full panel and just external support lattice to expand the assembly options.
Modern End Ramp Container 2 pack, ISO-MER02 $25
Modern End Ramp Container 5 pack, ISO-MER02 $55


Modern Side Door Container

Designed with double, center split, sliding doors
Modern Side Door Container 2 pack, ISO-MSD02 $25
Modern Side Door Container 5 pack, ISO-MSD02 $55


Open Topped Container

With a completely open center section this container allows for models and items to be place inside. Includes a open grid floor for added detail.
Open Topped Container 2 pack, ISO-OTC02 $25
Open Topped Container 5 pack, ISO-OTC02 $55


Iron Box Container



Designed to resemble a plate armored box perfect for steampunk or old west worlds. This one features a removable top and sliding doors.
Iron Box Container, 2 pack, ISO-IBC02 $25
Iron Box Container, 5 pack, ISO-IBC05 $55


Extra Long Container

When shipping large items you need a large container. This one is designed to use the same stacking system as the smaller containers but adds 2 inches to the overall design. It has large sliding doors on both sides.
Extra Long Container, ISO-ELC02 $20

Extras

Platform stabilizer feet
These are the same extra feet that come with the Sci-Fi container and are designed to lift the container up about 3/4". (Does not include the container)
Platform stabilizer feet, 1 set ISO-PSF $5

Loading Dock Wheels
Designed with 8 wheels and movable front leveling legs this kit is the perfect add on for a more realistic dock setting.
Loading Dock Wheels, ISO-LDW01 $10
Loading Dock Wheels, ISO-LDW05 $45



To order a set email us at BURNINDESIGNS@GMAIL.COM or to find out more and stay on top of our new releases please  "like" us on Facebook and follow us on Twitter at @burnindesigns.

No comments:

Post a Comment