New Products - Skirmish / Model Transport Trays

The likelihood that you will be stationed on the same table for a full 3 or 4 game tournament is very small. Eventually you are going to have to move to another table. Now the problem, grab the models by the handfull and move them usually scratching the paint you spent hours painting, take 10 minutes to put you army back in the case and move it then scramble to get it all unpacked before the next round starts or uses a book or other make shift tray to move them. Well here is a new option, custom cut and engraved transport trays. The trays are available sized from 5x7" for low model count games through a maximum size of 9x13" for larger model counts. Design is fully customizable with you chosing the size and layout for all the models. We also offer a few standard layouts. All trays include carry handles and have a soft EVA foam backing  to help eliminate sliding. As always custom engraving is available for all designs. Prices start at $8 for the smallest tray and go through $20 for the largest tray with pre-cut magnet holes for safer storage.

Blank basic tray - 15 40mm / 4 60mm slots

Custom Robotech Tray Design

Custom Robotech Tray Design

Sidebar - It is not all gaming all the time

Just a quick sidebar while I get the new products into the photo booth for pictures. This is an example of some of the other things I do with the laser engraver. This is a grey scale image that I engraved on a small piece of pine. The only requirement for this kind of work is the original image needs to have a clean background that has a decent amount of contrast with the subject. Isn't custom work fun.

Adepticon is over now and I learned allot about gamers

Just got back form Adepticon and it is time to start releasing some new stuff. I decided that I needed to ask more gamers what they really want to see and their thoughts on the existing products I have been making. Talk about a loaded question. Everyone I spoke with loved the stuff I was already doing and had great suggestions on new stuff to add. Most were great and doable, a few were a little grand and way to difficult to accomplish, and their was one that, well, lets just say there are some things I will not be making at any cost. On second thought, if we are talking a number followed by 6 zeros, and the check clears we can talk.

Back on target. I spoke with allot of gamers to get their ideas on what they would like to see. The biggest thing I heard from them were low prices and customization. Both are things that are close to my idea for the direction of Burn In Designs. Next was broken flight stand complaints and finally stuff for the pro painter.

So with that information I started designing and making prototypes. So coming soon I will be showing off, new things like custom fit vehicle flight stands, miniatures carry trays, new marker shapes, custom turn and damage counter, paint and brush tray systems and even carry cases for those wonderful Crystal Brush and Golden Demon minis. So watch this space because big things are coming.

Welcome and New Products

Hello and welcome to the Burn In Designs Blog / Product announcement page.

Burn In Designs is my new workshop and hobby outlet for laser cut table top gaming aids, terrain projects and general laser cut projects. The goal of this is to offer you new options that may not be available through other sources. Most products offered can be custom engraved or cut  to match your army. We also handle custom projects, built to order and to your specifications.

Here are some examples of our work and product offerings. If you see anything you like or have questions about custom projects, email us at BURNINDESIGNS @ GMAIL.COM.

50 pot paint rack

50 Pot Paint Rack

This is our 50 pot paint tray. It will hold 25 paints per tray. Each tray is cut to support both the old GW hex pots or the new GW round pots. The trays are also available for P3 and Reaper paints.

The overall size is for the unit is 11x10x6 inches. This way it gives a bunch of storage in the smallest possible space. The trays can be pivoted slightly to make getting to the ones at the back easier.

Custom engraving on the front of each tray is offered at no additional cost. We also offer it in several different acrylic colors in addition to the plywood seen here.

Collapsible Dice Roller 

Collapsible Dice Roller

Our Collapsible Dice Roller is a small 5x7" dice roller that will easily fit in you miniatures case. The unit is available in acrylic or wood and supports most standard die sizes. 

The unit is pre-drilled for magnets to make transport and use easier. This one is offered with custom engraving and just supply your own black and white line art or have us design a look for you. 

Again welcome to Burn In Designs and we hope you come back to see what we come up with next.